Operation - Menu Mode - ABB EasyLine Series Instructions For Installation Start-Up And Operation

102 EasyLine EL3000 Series Commissioning Instructions

Operation - Menu Mode

Display in Menu Mode
Structure of the Menus
Key Functions in Menu Mode
Starting from the main menu, each menu (see page 104) contains a
maximum of three menu items ("3-point menu"). Each menu option is
assigned to one of the three keys ,
therefore be selected directly. The button
higher menu.
The functions which are normally most frequently required are arranged
in the menu in such a way that they can be called by repeatedly pressing
the same button:
Operation Calibration
Zero Point / Single Point
Setup Calibration Data
Maintenance
Status Messages
3-point menu
Select menu item
Return to the next higher menu
OK Return to measuring mode
Component list
Select component
or OK Call up selected component for processing
Parameter list ("Selector")
Select parameters
Call up change in value
OK Accept all displayed values and return to the next higher menu
Discard all displayed values and return to the next higher menu
Change in value
Change selected position
Select position to be changed
OK Confirm altered value and return to the parameter list
Discard altered value and return to the parameter list
and ; each menu option can
is used to return to the next
Manual Calibration
Test Gas Set Points
Diagnosis Device Status