Table of Contents
Advertisement
5
User Interface Operation
To maximize cybersecurity, users are advised to change all
passwords from their default value.
WARNING!
Malware Protection
The analyzer's operating system runs Xubuntu 18.04LTS. ABB runs an anti-virus
scanner on each disk image at the factory to ensure no malware is inadvertently
included.
Set Up Communication
To establish communication and operate the analyzer, the following options are
available:
SSH: For remote shell login. Use your preferred SSH client (for example,
•
Putty) and log in using the IP address and SSH password.
Samba: For sharing the data directory on the network. Using the explorer,
•
navigate to: \\<IP-ADDRESS>\lgrdata, then log in with the Samba
password.
VNC Viewer: For remote login. Data transfer via VNC is not encrypted,
•
however, authentication credentials are. By default, VNC is not activated on
the analyzer. To enable VNC, navigate to Setup > Security. Refer to VNC
Viewer User Interface for setup instructions.
ABB GLA131 Series Microportable Analyzers User Manual
21
Advertisement
Table of Contents
