Van Raam Easy Rider 3 User Manual page 9

Check that the lights are working correctly. See chapter 'Before use' for the
•
correct setting of the lighting.
Check that the seat and handlebars are secure. See chapter 'Adjusting the
•
bicycle' for the correct adjustment of the seat and handlebars.
Make sure the battery is sufficiently charged (optional).
•
As with all mechanical parts, the bicycle is subject to wear and tear and high loads. If a
component fails, it can lead to very dangerous situations and to damage or injury to the
bicycle user. Any cracks, scratches or change of colour in heavily loaded parts of a
component is an indication that the part must be replaced.
Load
The maximum permissible load must not be exceeded. See the information in the table
with technical data under the chapter "Technical specifications" in the user manual.
Note that a basket full of luggage can significantly affect driving behaviour (especially on
slopes). No luggage may be carried on or hanging from the handlebars that restricts
bicycle riding.
Damaged or worn parts
The replacement and repair of the parts (frame, front fork, lighting, brakes, drive and
handlebar) should always be carried out by a dealer. Otherwise, the warranty will be void
and the user will be liable for any damage.
Safety related parts must always be replaced by new parts!
If there is any doubt about the functioning or the condition of components on
the bicycle, for example due to visual damage, slack or strange noises, an
authorized Van Raam dealer should always be consulted.
Version 23.02
9/71