Related Manuals for Van Raam CHAT
Summary of Contents for Van Raam CHAT
- Page 1 Instructions for the assembly and disassembly of the hood Version 20.01 Van Raam | Guldenweg 23 | 7051 HT Varsseveld | The Netherlands...
-
Page 2: Read Carefully
Internet : www.vanraam.com Conformity Van Raam declares as manufacturer that the Tandem bicycles, as described in this manual, are produced in accordance with the 93/42/EEG guidelines, risk category 1. All products have been produced in accordance with the 2006/42/EG guidelines. The declaration of conformity can be found on the Van Raam website. - Page 3 Place the frame in the bended tubes that have been placed in the bench. Step 5: Fold the hood in half on the edge between the foil window and mesh window. Instructions for the assembly and disassembly of the hood | Chat 20.01...
- Page 4 Attach the front of the hood by using the snap buttons. Step 9: Close both zippers on the back of the hood. Step 10: Attach the snap buttons from the hood tot the bench. Instructions for the assembly and disassembly of the hood | Chat 20.01...
- Page 5 Repeat this process on the remaining two side straps. Step 5: Reattach the elastic cord to the hooks. Step 6: The hood is properly assembled if it resembles the image on the right. Instructions for the assembly and disassembly of the hood | Chat 20.01...
- Page 6 Detach the snap buttons from the hood and the bench. Step 4: Fold both sides of the hood on the roof. Step 5: Push the front and rear of the frame towards each other. Instructions for the assembly and disassembly of the hood | Chat 20.01...
- Page 7 The rolled hood and frame can be lifted from the bended tubes. Step 10: Place the hood on the two lower hooks that can be found on the rear of the bench. Instructions for the assembly and disassembly of the hood | Chat 20.01...
- Page 8 Pay Attention! to your fingers. The brace can close with force. Step 13: The bended tube can be stored in the rear of the bench. Instructions for the assembly and disassembly of the hood | Chat 20.01...