Related Manuals for Van Raam Easy Sport
Summary of Contents for Van Raam Easy Sport
- Page 1 User Manual Easy Sport Easy Sport Small Van Raam Guldenweg 23 7051 HT Varsseveld, The Netherlands +31 (0)315 – 25 73 70 Version 24.01 info@vanraam.com www.vanraam.com...
-
Page 2: Table Of Contents
Adjustment of the tricycle ......................... 10 Before use ..............................15 Silent electrical system ..........................19 Silent Electrical System options ......................30 Van Raam e-bike app ..........................32 Options ................................33 Technical specifications ..........................38 Cleaning and maintenance by owner ..................... 39 Repair and maintenance by dealer ...................... -
Page 3: Manufacturer Contact Details
Small, as described in this user manual, is manufactured in accordance with Regulation (EU) 2017/745, risk class 1. The Easy Sport and Easy Sport Small supplied with the Silent electrical system also complies with Directive 2006/42/EC including the applicable parts of EMC Directive 2014/30/EU and the NEN-EN 15194:2017 Bicycles - Electric supporting bicycles - EPAC Bicycles - part 4.2 Electrical requirements. -
Page 4: Introduction
Introduction This user manual provides important and necessary information about the use of the Easy Sport and Easy Sport Small. We request that you read this manual thoroughly before using the bicycle. Always follow the instructions as provided in this user manual READ CAREFULLY and keep the manual carefully. -
Page 5: Intended Usage
Intended usage The tricycles are designed for normal use on a flat, solid surface. The usual caution for bicycles should always be observed. The safety instructions as described in this manual must also be strictly followed. Also, the local rules for participation in traffic must always be observed. -
Page 6: Safety Measures
• detected or if you hear a strange noise. If you cannot solve the problem yourself, please contact your Van Raam dealer. Pay particular attention to the wheels, handlebars and seat. Only use the bicycle on a solid and level surface. - Page 7 will be activated and the bicycle will start to reverse. Practice using the reverse and ride away functions. For more information, carefully read the chapter "Electro system Silent". If a charger is supplied with the bicycle, also read the information under the •...
- Page 8 Tips for safe biking Make sure you have properly adjusted the bike to the dimensions of the rider, then you can use the bike safely and comfortably. Riding a tricycle is a completely different experience compared to riding a bicycle with two wheels. Important safety points for the rider Ride very carefully on the first ride.
- Page 9 If there is any doubt about the functioning or the condition of components on the bicycle, for example due to visual damage, slack or strange noises, an authorized Van Raam dealer should always be consulted. As with all mechanical parts, the bicycle is subject to wear and tear and high loads. If a component fails, it can lead to very dangerous situations and to damage or injury to the bicycle user.
-
Page 10: Adjustment Of The Tricycle
Adjustment of the tricycle Before you start using the bike, set it to the dimensions of the rider. This is essential, especially for the seat and handlebars. If an optimal setting is not possible with the described instructions, you can contact your dealer for a suitable solution. - Page 11 Easy Sport Seating position and frame length By default the bike is fitted with a derailleur. Therefore, the length of the chain does not have to be alterd when the length of the bike changes. The range of this mechanism however, is limited.
- Page 12 [E] is fully visible. Setting the chain tension of the front chain (Easy Sport and Easy Sport Smal) In order to extend the bike further or to alter the position of the derailleur, the chain tensioners [B] can be moved.
- Page 13 Seat height (Easy Sport with comfort seat) The seat can be adjusted to the desired height. You determine the most comfortable position yourself in practice. To adjust the height: Loosen the four screws a few turns with an Allen key.
- Page 14 Seat height (Easy Sport with recumbent cockpit) The seat can be adjusted to the desired height. You determine the most comfortable position yourself in practice. To adjust the height: Loosen the three screws a few turns with an Allen key.
-
Page 15: Before Use
Before use Parking brake Always use the parking brake when you park (and leave) the bike. The image shows the parking brake in the parked position. Always try to park the bicycle on a level surface. It is not recommended to park the bicycle on a slope steeper than 10%. - Page 16 Manually operated headlight The headlight has a push button with three positions: ON – ON [50%] – OFF. Adjust the angle of the headlight so that the center of the light beam is approximately ten meters in front of the bicycle. The headlight works with batteries.
- Page 17 Manually operated rear light The rear light has an on/off button with which Off- Auto-On can be set. The seating is as follows: Press 1x lighting is on 1x = ON 2x = AUTO Press 2x lighting is automatic 3x = OFF Press 3x lighting is off In the “On/Off”...
- Page 18 Centrally operated lighting The bicycle is equipped with centrally operated lighting (front and rear) with the lighting connected to the electrical system. The lighting switches on automatically when the electrical system is activated. Adjust the angle of the headlight so that the center of the light beam is approximately ten meters in front of the bicycle.
-
Page 19: Silent Electrical System
Silent electrical system Item number: -2195 The Silent electrical system comprises 5 components: display, button unit, battery, motor and bottom bracket. How the first 3 parts are used is explained in this user manual. Operation of the display The display provides you with cycling information, which will be explained in more detail later. - Page 20 Information screen After the electrical system is powered up, the information screen is displayed. This screen displays real-time cycling information. The information screen will only work if you have switched on the electrical system. (a) Bluetooth connection (b) Reverse function of (thumb) throttle activated (c) Notification field (d) Bicycle lights (e) Speed indicator...
- Page 21 Screen modes The screen mode (i) can be set by using the mode button (3) You can switch between the following 3 screen modes while cycling. Radius of action [RANGE] (default display) This is the number of kilometres that can still be cycled with the remaining battery capacity in the active assistance mode.
- Page 22 Notifications Several symbols can be displayed in the information screen. The symbols are explained below. More information on the notifications can be found in the chapter “Possible Faults”. The bicycle lights are activated A Bluetooth connection is active No communications with the battery Reverse function of (thumb) throttle is activated The temperature of the controller is too high Voltage is too high...
- Page 23 Van Raam app. Van Raam E-Bike app With the app, you can track various information and configure the assistance modes. (More information on this can be found in the chapter on the Van Raam E-Bike app) Version 24.01 23/51...
- Page 24 Charging the battery To charge the battery: 1. Unlock the battery by turning the key a quarter turn. 2. Press the lock in and simultaneously pull the battery pack out of the holder with your other hand. 3. Take the battery with you inside. First plug the charger into the power outlet.
- Page 25 Charger indicator light The status of the charger is indicated by the coloured indicator light. If the indicator light is green, the charger is in standby mode or the battery is full. If the indicator light is red then the charger is charging the battery.
- Page 26 The housing of the battery and the charger must not be opened. In case of any • problems, please consult your dealer. A Van Raam battery is not allowed nor is it possible to recondition the battery due to • safety reasons and incorrect functioning of the electrical system.
- Page 27 Keep in mind that the bike provides less assistance at lower temperatures (0ºC and below) and that the battery will drain more quickly. It also takes longer to charge at low temperatures. Every battery drains over time. This process is called "self-discharge". A battery that is empty and not charged can undergo a deep discharge caused by self-discharge and become faulty as a result.
- Page 28 Faults table Fault symbol/ code Description Consequence/ course of action All assistance modes are Temperature System does provide assistance, flashing controller too high motor power is reduced. Thermometer (symbol) + Temperature System does not provide all assistance modes are controller too high assistance, let the controller cool flashing.
- Page 29 Charging and maintenance of the battery pack Important safety warning: Charger safety precautions Only charge Van Raam Li-Ion batteries with the supplied charger. Only connect the • charger to a suitable wall socket (220-240 Volt AC 50-60 Hz). When the charger is not in use, disconnect it from the power outlet and the power plug from the battery.
-
Page 30: Silent Electrical System Options
Silent Electrical System options There are different options for the electrical system for each bicycle model. External charging point Item number: -2161 In order to make battery charging more accessible, the bicycle can be equipped with an external charging point in the backrest. The battery does not have to be removed from the bicycle to be charged. - Page 31 Thumb throttle Item number: -2183 The bicycle can be fitted with a thumb throttle. The thumb throttle is mounted next to the handlebar grip and can be operated by the thumb. When the throttle lever is operated, the bike will travel up to a maximum speed of 6 km/h without the need to pedal. The switch on the throttle lever can be used to switch between forward and reverse gears.
-
Page 32: Van Raam E-Bike App
Van Raam e-bike app The Van Raam bicycle app is a free smartphone app that you can use while cycling on your electric Van Raam bicycle. What can you do with the Van Raam e-bike app? App can be used as a luxury bicycle computer •... -
Page 33: Options
Options Options are suitable for both the Easy Sport and Easy Sport Small unless otherwise indicated. Crank shortener The crank shortener is attached to the crank (as shown). The pedal can then be mounted in two positions in the crank shortener. - Page 34 Foot fixation With the foot fixation you can fix the foot by sliding the two notched straps [A] into the quick releases [B]. The quick release can be unlocked by pulling the lip back completely. The notched strap can then be pulled out.
- Page 35 The foot fixation returns to its neutral position when not in use. The neutral position can be determined by sliding the balance block. 1. Loosen the two nuts a few turns with a socket wrench. 2. Slide the balance block into the desired position.
- Page 36 [C] again. With the clamp buckle [D] you can tighten or loosen the belt. The illustration does not quite match the seat of the Easy Sport. But the seat belts are the same. Version 24.01 36/51...
- Page 37 Direction indicator Only Easy Sport To operate the direction indicator, push the switch [A] to the left or right. If you want to turn off the direction indicator, put the switch in the middle position. The direction indicator works with batteries. To replace the batteries, loosen the screw on the cover and remove the orange cover [B].
-
Page 38: Technical Specifications
Technical specifications Easy Sport Easy Sport Small Inseam (cm) 47 - 73 65-105 Length (cm) 171-186 195-225 Width (cm) Height (cm) Entry height (cm) Front tire 16” 20“ Rear tire 16” 20“ Weight (kg) configuration without electrical Max. weight user (kg) Max. -
Page 39: Cleaning And Maintenance By Owner
Cleaning and maintenance by owner Below are instructions for maintenance and adjustments that you can carry out yourself on a regular basis. This keeps the condition of the bicycle optimal. Cleaning The frame of the tricycle can be cleaned with a damp cloth. You can use a mild detergent for dirty spots. - Page 40 If you do want to replace components yourself, you are liable for damage or injury as a result of incorrectly mounted components. Only use original Van Raam spare parts, you can purchase these from your dealer. Upon request, the dealer will provide the necessary information for repair and maintenance.
-
Page 41: Repair And Maintenance By Dealer
In that case, the rim must be replaced, because otherwise this can lead to a reduction in the braking effect or even a break in the rim with all the dangerous consequences that entails. Repairs, maintenance and modifications may only be carried out with original Van Raam parts. Tightening torques... - Page 42 Adjusting chain tension Easy Sport and Easy Sport Small For the Easy Sport, thanks to the derailleur, in most cases it is not necessary to adjust the tension of the front chain. In the case of the coaster option, back pedal brake or with body height above 1.90m this is the case.
-
Page 43: Return Point For Removal
Do you use the Van Raam E-Bike App and have you linked your bike and battery to the app? Make sure you disconnect the bike and battery from the app when transferring/selling. -
Page 44: Warranty
Van Raam parts, without permission from Van Raam. The original CE-declaration on the bicycle will also lapse in the event of adjustments by third parties. -
Page 45: Frame Number
Frame number You will find the frame number on the sticker. This sticker is applied to the frame, see pictures. Example sticker: Position sticker Easy Sport and Easy Sport Small: Easy Sport Under the seat tube Easy Sport Small Under the seat tube Version 24.01... -
Page 46: Maintenance Recommendation
A Van Raam bike often is subject to extensive use and must perform in all weather conditions. By correctly maintaining the bike, the lifecycle can be extended greatly. This maintenance can be done by a Van Raam dealer. In most cases, you can do the monthly and annual inspection yourself. - Page 47 Service moment 15-30 minutes Among them: Check tyres and inflate • Check the spoke tension • Check the chain tension and grease • Tighten any bolts and nuts if needed • Check all brake cables and brake calipers • Check the gears •...
-
Page 48: Service Plan
Service plan Service moment Yes/No Date: Dealer: Mechanic: Remarks: ………………………………………………………………………………………………………………………………………… …………..…………………………………………………………………………………………………………………………… ………………………..……………………………………………………………………………………………………………… ……………………………………..………………………………………………………………………………………………… Service moment Yes/No Date: Dealer: Mechanic: Remarks: ………………………………………………………………………………………………………………………………………… …………..…………………………………………………………………………………………………………………………… ………………………..……………………………………………………………………………………………………………… ……………………………………..………………………………………………………………………………………………… Service moment Yes/No Date: Dealer: Mechanic: Remarks: ………………………………………………………………………………………………………………………………………… …………..…………………………………………………………………………………………………………………………… ………………………..……………………………………………………………………………………………………………… ……………………………………..………………………………………………………………………………………………… Version 24.01 48/51... - Page 49 Annual inspection Date Dealer Mechanic Remarks Version 24.01 49/51...
- Page 50 Notes: Version 24.01 50/51...
-
Page 51: Delivery And Service Form
With this form, the dealer and the end user also sign that the end user has been instructed about the operation of the bicycle, that the bicycle has been adjusted to the wishes of the end user and that the end user has received the original Van Raam manual.