Handlebar height
The height of the handlebars influences the riding comfort. This determines the pressure
on the hands and the posture of the back. You determine the most comfortable position
yourself in practice.
To adjust the height of the handlebars:
1.
Tilt the handlebars to the lowest position
as shown in the picture. (Read handlebar
position for information on tilting the
handlebar stem)
2.
The hexagon bolt can be reached by
tilting the handlebars downwards.
3.
Loosen the bolt [A] with a few turns
with an Allen key.
4.
Then loosen the parking brake clamp
bolts a few turns [B].
5.
Slide the handlebar stem to the
correct height and then re-tighten the
screw.
6.
Finally, re-tighten the parking brake
clamp bolts [B]. Make sure the parking
brake clamp always connects to the
handlebar tube [C].
Do not pull out the handlebar stem further than the mark,
otherwise the tube will not penetrate deep enough into the
shaft and there is a risk of breaking off, which could result in
serious injury.
Version 23.02
[A]
[B]
MIN INSERT
15/71
[C]