Van Raam Easy Rider 3 User Manual page 36

Charging and maintenance of the battery pack
Important safety warning:
Charger safety precautions
Only charge Van Raam Li-Ion batteries with the supplied charger. Only connect the
•
charger to a suitable wall socket (220-240 Volt AC 50-60 Hz). When the charger is not
in use, disconnect it from the power outlet and the power plug from the battery.
The charger may only be used by persons who have read the information in this
•
manual and are familiar with the correct use of the charger. Keep the charger out of
reach of children; they should not play with the charger.
The charger is designed for use in a dust-free, dry and ventilated environment. Do not
•
expose the battery to water, heat sources and direct sunlight. Keep the charger clean
and dry.
Do not charge batteries that feel hot. The battery may only be charged in places where
•
the temperature is no higher than room temperature. Stop charging if the battery
becomes abnormally warm (> 40 ° C).
Caution! The charger can become warm during charging > 50 ° C. First, carefully feel
whether you can pick up the charger, this temperature can cause hypersensitivity or a
reaction of shock when it comes into contact with the skin.
Do not use the charger if it is visibly damaged or modified. Do not repair the charger
•
yourself! Please contact Van Raam. You are strictly prohibited from opening the
charger yourself!
Always keep an eye on the charger and battery while charging. When the battery is full,
•
disconnect the power plug from power outlet and remove the power plug from the
battery.
Version 23.02
36/71