Tightening torques
Onderdeel
Handlebar stem bolt Easy Rider Small
Handlebar bolts Easy Rider Small
Headset bearing handlebar
Headset bearing front fork
Swingarm mounting bolts
Motor nuts
Bottom brakcet bolts
Crank bolts
Calliper bolts
Wheel bolts
Wheel nuts
Bolt quick-release lever seat adjustment
Chest bolt backrest
Setting the adjustable handlebar stem
(Easy Rider, Easy Rider Compact)
If the handle of the handlebar stem does
not close properly and the handlebars are
not sufficiently clamped by the stem, the
adjustment bolt must be readjusted.
Follow the following instructions to
properly adjust the handlebar stem:
1.
Open the handlebar stem bracket [A].
2.
Now the adjusting screw can be set.
3.
To increase the clamping force: tighten the adjusting bolt clockwise.
4.
To decrease the clamping force: loosen the adjusting bolt counter clockwise.
5.
Now close the handlebar stem bracket [A].
Version 23.02
Moment
21-23 Nm
12-14 Nm
Free of slack
Free of slack
70 Nm
50 N
30 Nm
37 Nm
10 Nm
30 Nm
37 Nm
10 Nm
25 Nm
[A]
[B]
56/71