Van Raam Easy Rider 3 User Manual page 31

10. Place the battery back into the holder on the bicycle
and lock the battery. Optionally, the battery can also
be charged directly in the holder.
Charging the battery
(Easy Rider, Easy Rider Small)
For optimal condition and capacity of the battery we
recommend that you charge the battery inside at room
temperature.
Only use the charger when the ambient
temperature is between 0 and 35 degrees.
To charge the battery indoors, follow steps 1 to 9. To
charge the battery on the bike, follow steps 4 to 8.
1. Unlock the battery by turning the key a quarter
turn.
2. Press on the lock and hold it down. Then pull the
battery out of the holder with the other hand.
3. Take the battery inside.
4. First plug the socket into the power outlet. The
green LED lights up. The charger is now on stand-
by.
5. Then plug the charging connector of the charger
into the charging point of the battery. The red LED
lights up. The charger is now charging.
Please note! If the battery is not properly
connected, the green LED is on (standby mode). If
the connection is insufficient, remove the plug
from the socket and disconnect the connector
from the charger with a dry cloth.
6. The charging time depends on the battery status.
The charging time is approximately 2 hours with a
Version 23.02
31/71