Table of Contents
Advertisement
Options
Removing the seat for transport
(Easy Rider, Easy Rider Compact)
With the Easy Rider it is possible to detach the seating. This is a standard function that is
present on every Easy Rider 3. By removing the seat, transporting the bike on a carrier
might become easier. Caution! It is important to always check the maximum loading
weight of your bike carrier and to not exceed this limit. Specifications of the Easy Rider can
be found in the chapter 'Technical Specifications'.
Removing (and transporting) the Easy Rider seat
In preparation, line up the bike with the bike carrier
while it is installed on the vehicle. This to allow for a
smooth transition onto the carrier. Then follow these
steps:
1.
Engage the parking brake, remove any objects
from the basket and remove any other loose
objects that may fall off the bike.
2.
In case you have an Easy Rider with pedal
assist, first remove the charging cable. This is
the cable leading from the battery to the
external charging point in the seat.
3.
To detach the seat, you need to remove the
screw under the seat with an Allen key (size 4).
Please note! Store this screw in a secure place
as you will need the screw once you place the
seat back onto the bike.
4.
Open the quick release pin on the side of the seat and pull the entire seating unit
backwards to remove the seat from the bike.
5.
You can now store the seat and the battery in the vehicle, and you can place the bike
on the bike carriage.
Version 23.02
3.
4.
41/71
Advertisement
Table of Contents
