Table of Contents
Advertisement
Replacing the shock absorber Easy Rider
The Easy Rider has a suspension frame (optional choice of suspension suitable for the
body weight). To replace the suspension
hoist. Make sure the swingarm can hang freely from the rear fork.
To replace the suspension:
1.
Loosen the hexagon bolt [A]. Hold a wrench
on the nut, otherwise the nut will rotate.
2.
Support the swingarm and loosen the bolt
[A]. Please note! The swingarm will drop
down if unsupported. Now slowly lower the
swingarm.
3.
Now the hexagon bolt [B] of the swingarm
can be loosened.
4.
The suspension can now be replaced.
5.
Please note! The suspension must be
mounted in the damper free of slack. To do
this, turn the tension ring [C] in the direction
shown in the picture. This can be done by
turning the suspension by hand, the tension
ring will then rotate.
6.
Re-tighten the bolts [A, B].
For the best handling characteristics, it is
recommended to choose a suspension that fits the
weight of the user.
Suspension type:
550 lbs
750 lbs
1000 lbs
Version 23.02
is recommended to hang the bicycle in a
User weight:
< 80 kg
80 – 110 kg
> 110 kg
[A]
[B]
[C]
60/71
Advertisement
Table of Contents
