Van Raam Easy Rider 3 User Manual page 13

Adjusting seat depth
The seating area of the seat can be adjusted to tailor the
seat to the user's comfort. To adjust the seat, follow these
steps:
1. Remove the seat cushion [A] from the seat
frame.
2. Now that the seat cushion has been removed, the
seat frame can be adjusted in relation to the
backrest.
3. To do this, loosen the 4 socket-head screws [B] a
few turns.
4. Slide the seat frame forwards or backwards.
5. Tighten the 4 socket-head screws [B].
6. Position the seat cushion by first sliding the front
edge over the seat frame. Then press the 4 snap
caps into the holes.
Carrier frame
A carrier frame [A] is fitted to the backrest of the Easy
Rider Compact seat as standard. This is a universal
carrier frame on which single-sided panniers can be
mounted (frame tube diameter is 12 mm).
The tube clamps [B] prevent the pannier from sliding
off the frame. These clamps can be repositioned for a
specific pannier. The clamps can be repositioned by
using an Allen key to loosen the bolt.
Caution! The carrier plate slides with the seat.
Watch out for the tricycle's tendency to tip when
Version 23.02
[A]
[B]
[B]
13/71
[A]