Van Raam Easy Rider 3 User Manual page 25

Screen modes
(Easy Rider Compact)
The screen mode (i) can be set by using the mode button (3) You can switch between the
following 3 screen modes while cycling
1. Radius of action [RANGE] (default display)
This is the number of kilometres that can still be cycled
with the remaining battery capacity in the active
assistance mode.
The range is assistance mode dependent and is an estimate, so the actual range may
differ from the estimate. The range is dependent on several factors. Among others, the
range is influenced by: battery capacity, amount of assistance, tyre pressure, ride speed,
rider weight and load, and the environment.
2. Trip distance [TRIP]
This is the distance travelled since the trip odometer
was last reset. By holding down the mode button for
one second, the
3. Total distance [TOTAL]
This is the total distance travelled by the bicycle with
the electrical system switched on.
Settings screen
(Easy Rider Compact)
In the settings screen, the brightness of the display and the
units of distance and speed can be changed.
To access the settings screen, the mode button (3) and the
plus button (4) should be pressed down simultaneously for
one second.
The plus and minus buttons (4, 5) can be used to switch
between the settings.
The mode button (3) can be used to change the settings.
To exit the settings screen, hold down the mode button (3)
for one second.
Version 23.02
.
trip odometer can be reset to 0.
25/71