Van Raam Easy Rider 3 User Manual page 59

Adjusting chain tension Easy Rider Small
In order to set the chains to the correct tension, the following actions must be taken:
1. Loosen the nut [A] a few turns. On the
other side, prevent the nut from
turning with a wrench.
2. Push the tensioner upwards to
increase the tension on the chain.
3. When the chain has the correct
tension, tighten the nut [A] again.
4. Loosen the nuts [B] on both sides of
the hub a few turns.
5. Then loosen the tensioner nut [C] a
few turns.
6. Now tighten the nuts [D] to increase
the chain tension. When the chain has
the correct tension, the nuts [B] can
be tightened.
7. Now pull the tensioner down to
increase the tension on the chain and
then retighten the nut [C].
Version 23.02
[A]
[B]
[D]
[C]
[C]
59/71