Table of Contents
Advertisement
To put the two parts of the bike back together follow these steps:
Tip: do not put the bike on the parking brake, this makes it lighter.
1.
Make sure the star knob [D] is completely
turned loose.
2.
Clamp the front of the bike into the frame
connection [F].
3.
Lift the front [E] of the bike to connect the
bike (leverage effect) .
4.
Tighten the connection by turning the star
knob. Slightly lift the front of the bike to
make sure the connection is flush. Please note! Make sure the connection is
flush and the knob is completely tightened before
using the bike.
5.
You can now put the handle back on the handlebars.
6.
Connect the connector of the lights. Make sure that
the two white lines [G] are lined up with each other.
7.
Finally, you can now secure the cables in place using
the Velcro straps [A].
Version 23.02
[F]
\
[G]
44/71
Advertisement
Table of Contents
