Connect With Loggernet - Campbell CR300 Series Operator's Manual

CR300-Series Datalogger
Click the Monitor Data tab. When
the Monitor Data tab is first opened
for a datalogger, values from the
Public table are displayed.
To view data from other tables, click
Add. Add entire tables or select
fields by dragging them into cells in
the Monitor Data window. Each
table will update as described in
Section 5.6, Monitoring Data
Click Disconnect to end the session.

4.2.2 Connect with LoggerNet

Open LoggerNet Connect. From the
LoggerNet toolbar, click Main |
Connect.
In the Stations list, select the newly
added CR300.
Press Connect.
8
.
(p. 23)