Collect Data With Loggernet - Campbell CR300 Series Operator's Manual

CR300-Series Datalogger

4.6.2 Collect Data with LoggerNet

Open LoggerNet Connect. From the
LoggerNet toolbar, click Main |
Connect.
In the Stations list, select the newly
added CR300.
Press Collect Now.
Collect data from the OneMin table by clicking Collect Now.
After LoggerNet collects the data, a
window titled Data Collection
Results opens. Among other
information, this window shows the
tables collected and where the tables
are now stored on the PC.
To immediately view data, click
View File in the Data Collection
Results window. This opens View
Pro, which shows the entire data
file. See Section 4.7, View Data .
(p. 18)
17