Power Requirements - Specifications; Compliance - Specifications; Physical - Specifications - Campbell CR300 Series Operator's Manual

7.12 Power Requirements – Specifications
Charger Input:
External Batteries:
Internal Lithium Battery:
Typical Power Requirements
USB Power:
7.13 Compliance – Specifications
CE:
Shock and Vibration:
Protection:
7.14 Physical – Specifications
Dimensions:
Weight/Mass:
Case Material:
CHG+ and CHG- terminals
16 – 32 Vdc
Current limited to 0.9 A maximum.
Power converter or solar panel input.
BAT+ and BAT- terminals
10 – 16 Vdc input
12 Vdc, lead-acid 7 Ah battery, typical.
3 V coin cell CR2016 (Energizer) for battery-
backed clock
6-year life with no external power source.
Sleep:
1.5 mA
Active 1 Hz Scan 1 : 5 mA
For programming and limited functionality.
VX1 – VX2 range reduced to 150 to 2500 mV.
SW12V nonoperational. Control ports output
4.75 V with limited current.
View the EU Declaration of Conformity at
www.campbellsci.com/cr300.
ASTM D4169-09
IP30
14.0 x 7.6 x 5.1 cm (5.5 x 3.0 x 2.0 in)
additional clearance required for cables and
leads
242 g (8.5 oz)
Powder-coated aluminum
CR300-Series Datalogger
49