Typical Data Table; Toa5 Environment Line - Campbell CR300 Series Operator's Manual

CR300-Series Datalogger
TOA5 CR300Series
TIMESTAMP RECORD
TS RN
2016-03-08 14:24:00 0
2016-03-08 14:25:00 1
2016-03-08 14:26:00 2
2016-03-08 14:27:00 3
2016-03-08 14:28:00 4
2016-03-08 14:29:00 5
Field Entry in TABLE
1 TOA5
2 CR300Series
3 CR300
4 142
5 CR300.Std.01
6 CPU:MyTemperature.CR300
7 1958
8 OneMin
24
data table will update at its own data table interval or according to a trigger set
within the program.
The data file consists of five or more rows. Each row consists of columns, or
fields. The first four rows constitute the file header. Subsequent rows contain
data records.
TABLE 5-2. Typical Data Table
CR300 142 CR300.Std.01
BattV_Avg PTemp_C_Avg Temp_C_Avg
Volts Deg C
Avg Avg
0 21.84
0 21.84
0 21.84
0 21.85
0 21.85
0 21.85
Each data table is associated with overhead information, referred to as "table
definitions," that becomes part of the file header (first few lines of the file)
when data are downloaded to a PC.
The first header row of the data table is the environment line. It consists of
eight fields, listed in TABLE 5-3.
TABLE 5-3. TOA5 Environment Line
5-2 Description
Table output format
Station name
Datalogger model
Datalogger serial number
Datalogger OS version
Datalogger program name
Datalogger program signature
Table name
The second header row reports fieldnames. This row consists of fieldnames
that identify the name of individual fields as given in the datalogger program.
Default fieldnames are a combination of the variable names (or aliases) from
which data are derived and a three-letter suffix. The suffix is an abbreviation of
the data process that outputs the data to storage. See TABLE
these abbreviations.
CPU:MyTemperature.CR300
Deg C
Avg
20.71
20.63
20.63
20.62
20.52
20.64
Changed By
LoggerNet Setup or Connect Custom
Collection | File Format
Device Configuration Utility or
CRBasic program
New OS
New program
New or revised program
Revised program
1958 OneMin
5-4 for a list of