Table of Contents
Advertisement
Beyond the basics
Setting the confirmation stamp
You can set your fax machine so that it will automatically place a small stamp mark
on the front of each original document that it successfully scans.
Important: Turn off this feature if you're sending documents you don't want the
fax to stamp.
1
Press /
,
, 2, 0,
PROGRAM
J
Stamp:
Program/Enter
2
Press
or /
until the mode you want appears.
PROGRAM
In this example, we've chosen On.
Stamp:
Program/Enter
3
Press
to save the setting.
ENTER
Language settings
English is the language your machine initially displays on the
reports. But you can set it to "speak" French, Spanish or German, too.
As you give the order for the machine to change languages, it "rolls" from English to
French to Spanish to German, and then back to English.
To make the change from one language to the next, press /
Checking the language
If, after making a language change, you're not sure which language is showing,
press /
once and decide based on what you see on the
PROGRAM
A Num. Une-Touche
Program./Val.
A Núm. Una-Tecla
Program./Sel.
A Zielwahl
Programm/Eing.
If the language you see is the one you want, press
If you want to change languages, press
Then press /
, # again to go to the next language in the cycle.
PROGRAM
2.6
. The
shows your fax's current setting:
ENTER
LCD
Off
On
and uses to print
LCD
PROGRAM
LCD
is French.
is Spanish.
is German.
to return to standby mode.
STOP
to return to standby mode.
STOP
Printing your settings
After you've programmed settings into your machine, print a settings list. We
recommend this, particularly if you're sharing the machine with other users, who
might change the settings.
With this list, you can quickly confirm that all of your settings are correct, without
having to go back and check them on the machine. Or, if you do need to undo
someone else's changes, this list guides you in returning the machine to your
preferred settings.
Note: Please refer to the index at the end of these instructions to locate any
settings you don't recognize or understand.
To print the settings list:
1
Press /
Enter Time
2
Press
Print Setting List
3
Press
Printing a program list
, #.
Your machine can also print a program list. This lists the functions available on your
fax machine and the keystrokes needed to complete them.
Note: Please refer to the index at the end of these instructions to locate any
:
settings you don't recognize or understand.
To print a program list, press /
Note: If you have additional options installed on your machine, the list may be two
pages long.
,
,
.
PROGRAM
I
ENTER
'99 09/11 20:30
until the
shows:
ENTER
LCD
Enter/Stop
to print the settings list.
ENTER
, *, 8.
PROGRAM
Advertisement
Table of Contents
