Setting The Language; Printing Your Settings; Printing A Program List - Muratec F-65 Operating Instructions Manual

Beyond the basics

Setting the language

While English is the language which your machine initially uses to display messages
and print reports, you can set it to "speak" French or Spanish, too!
To make the change from one language to the next, press
¿Qué es? — or, What is it?
If you aren't sure which language is showing after you've made a language change,
press once and decide based on what appears on the
PROGRAM
Num. Une-Touche
Núm. Una-Tecla
If the language you see is the one you want, press
If you want to change languages, press
press , # to go to the next language in the cycle.
PROGRAM

Printing your settings

After you enter your settings, print a settings list.
With this list, you can quickly check all the settings without having to check them
on the machine.
Note: Please refer to the index at the end of these instructions to locate any set-
ting you do not recognize or understand.
To print the settings list, press
2.6
, #.
PROGRAM
:
LCD
is French.
is Spanish.
to return to standby mode.
STOP
to return to standby mode and then
STOP
, , 2, 1, .
PROGRAM J ENTER

Printing a program list

Your machine can also print a program list. This list gives a brief summary of
instructions available on your fax machine, organized in a "program tree" so you
can see which key combinations produce which instructions.
Note: Please refer to the index at the end of these instructions to locate any set-
ting you do not recognize or understand.
To print a program list, press
PROGRAM
, * , 8. Your machine will print the list.