Table of Contents
Advertisement
Beyond the basics
Note: Do not enter any characters here. If you do, you can't program a
batch transmission into this key. If you accidentally enter characters
here, press
CANCEL
before you go on to step 7.
Note: If this key already holds a batch transmission, skip to step 8.
7
Press
-
three times and then press
COM
OPTIONS
Batch Tx
Enter Box No.
8
Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we've entered 5:
Batch Tx
Enter Box No.
Note: To change an identifier already entered, press
Then re-enter the correct identifier.
9
Press
.
ENTER
10
The
asks if you want to program additional settings for this programma-
LCD
ble one-touch number.
67: Option:
Program/Enter
If you do not want to program additional settings, press
to step 22.
If you do want to program additional settings, press /
11
The
asks which resolution you want to set for this programmable one-
LCD
touch number.
67: Primary: ---
Program/Enter
12
Press /
until the mode you want appears.
PROGRAM
Note: For any of the following settings, choosing "---" tells the machine to
use its default setting for this one-touch key.
13
Press
. The
asks which contrast mode you want when using this
ENTER
LCD
programmable one-touch number.
67: Contrast: ---
Program/Enter
14
Press /
until the mode you want appears.
PROGRAM
2.50
as many times as needed to erase all of them
. The
shows:
ENTER
LCD
_
5_
to erase it.
CANCEL
Off
ENTER
PROGRAM
15
Press
ENTER
using this programmable one-touch number.
67: Stamp: ---
16
Press /
17
Press
ENTER
programmable one-touch number.
67: Cover Page: ---
18
Press /
19
Press
ENTER
using this programmable one-touch number.
67: Copy&Fax: ---
20
Press /
21
Press
ENTER
22
The
LCD
and then skip
If you do not want to enter or change any other key's programming, press
to return your machine to standby mode.
and
.
ENTER
If you do want to enter or change this key's programming, go back to step 4.
If you want to enter or change another key's programming, go back to step 2.
. The
asks if you want the confirmation stamp on or off when
LCD
Program/Enter
until the mode you want appears.
PROGRAM
. The
asks if you want to send a cover page when using this
LCD
Program/Enter
until the mode you want appears.
PROGRAM
. The
asks if you want the Copy & Fax feature on or off when
LCD
Program/Enter
until the mode you want appears.
PROGRAM
.
now displays the next programmable one-touch key.
STOP
Advertisement
Table of Contents
