Table of Contents
Advertisement
Beyond the basics
14
Press /
until the mode you want appears.
PROGRAM
15
Press
. The
asks if you want the confirmation stamp on or off when
ENTER
LCD
using this programmable one-touch number.
68: Stamp: ---
Program/Enter
16
Press /
until the mode you want appears.
PROGRAM
17
Press
. The
asks if you want the memory transmission on or off
ENTER
LCD
when using this programmable one-touch number.
68: Memory Tx: ---
Program/Enter
18
Press /
until the mode you want appears.
PROGRAM
19
Press
. The
asks you for the type of confirmation report you want to
ENTER
LCD
set for this programmable one-touch number.
68: Conf.Report: ---
Program/Enter
20
Press /
until the mode you want appears.
PROGRAM
21
Press
. The
asks if you want to send a cover page for this program-
ENTER
LCD
mable one-touch number.
68: Cover Page: ---
Program/Enter
22
Press /
until the mode you want appears.
PROGRAM
23
Press
. The
asks if you want to turn the Copy & Fax feature on or
ENTER
LCD
off for this programmable one-touch number.
68: Copy&Fax: ---
Program/Enter
24
Press /
until the mode you want appears.
PROGRAM
25
Press
.
ENTER
26
The
now displays the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
Your machine returns to standby mode.
If you do want to enter or change this key's programming, go back to step 4.
If you want to enter or change another key's programming, go back to step 2.
2.46
Programming a broadcast / group
Programming a broadcast is very similar to programming a delayed transmission.
But instead of sending to just one phone number, you set up multiple numbers for
the transmission.
To program a broadcast / group into a programmable one-touch key:
1
Press /
PROGRAM
one-touch number available:
Select Program No.
65:No Number Stored
Note: If a programmable one-touch number other than 65 appears on the
, it means that you have already entered a number for 65.
LCD
Note: To erase a programmable one-touch key, see page 2.57.
2
Press the key you want to program or change. Here, we've selected 66.
Select Program No.
66:No Number Stored
Note: If your previous command for this key was for a broadcast / group
transmission and you want to keep this key programmed for a broad-
cast / group transmission, use these instructions to make changes. But
if you want to assign this key to a completely different operation (for a
delayed transmission, for example), then you first must erase the
stored command before programming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the
4
Press
. The
ENTER
the one-touch:
66:
Program/Enter
Note: If changing a previously stored command, skip to step 7.
5
Press /
PROGRAM
66:
Program/Enter
.
STOP
6
Press
. The
ENTER
66:Fax#/Com-Options
_
,
, 1,
. The
shows the first empty programmable
C
ENTER
LCD
, press that key now.
LCD
asks for the type of operation you want to program into
LCD
Type: Comm.
until "Comm." appears.
Type: Comm.
now shows either
LCD
66:Fax#/Com-Options
or
9-5558743_
Advertisement
Table of Contents
