Table of Contents
Advertisement
Just in case ...
Printouts have irregularities
ABCDE
• The paper you're using may have absorbed moisture, per-
haps due either to high humidity or water having been
ABCDE
spilled on the paper supply. Toner will not adhere well to
ABCDE
wet paper.
Replace the paper with dry paper and try printing again.
ABCDE
ABCDE
Printouts have white and/or black lines
ABCDE
• The toner cartridge or drum cartridge may be defective.
Remove the cartridges and check them for damage.
ABCDE
If the problem persists, replace either or both of the car-
ABCDE
tridges as indicated.
• The charger may be dirty.
ABCDE
Your machine normally cleans the charger automatically.
ABCDE
If other solutions fail, please contact your authorized
Muratec dealer.
Printouts have black lines or multiple streaks
• The toner cartridge may have been stored improperly.
Try printing test pages to clear up the problem:
1
Press /
The fax will print one page of a checkered test pattern.
2
After printing the page, the machine asks if you want
to print another test page. The
Printer Test
3
If the printing problem persists, press
another test page.
OR
4
Press
mode.
3.4
, one-touch 40.
PROGRAM
shows:
LCD
Start/Stop
START
to cancel printing and return to standby
STOP
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
to print
Printouts have toner smudges
• The toner may be unevenly distributed inside the toner
cartridge.
Remove the toner cartridge and shake it a few times to
redistribute the toner inside. If the problem persists, replace
the cartridge.
• The toner cartridge or drum cartridge may be defective.
Remove the cartridges and check them for damage. If the
problem persists, replace either or both of the cartridges as
indicated.
• If you find smudges on the back of the printouts, the trans-
port roller may be dirty.
Your machine normally cleans the transport roller automat-
ically. If other solutions fail, please contact your authorized
Muratec dealer.
Printouts have white spots
• The charger may be dirty.
Your machine normally cleans the charger automatically.
If other solutions fail, please contact your authorized
Muratec dealer.
Advertisement
Table of Contents
