Table of Contents
Advertisement
Beyond the basics
4
The
now asks if you want to enter a number:
LCD
Set BlockJunk Dial
Program/Enter
If you want to enter or modify a number, press
Otherwise, press /
PROGRAM
5
Depending on if you have already entered at least one number into the
blocked numbers list, the display shows one of the following:
Enter Fax Number
01:_
6
If you want to modify an existing entry in the blocked numbers list, press
or /
until you see the number you want to modify.
PROGRAM
... or ...
If you want to enter a new number in an already-started blocked numbers
list, press
or /
PROGRAM
Then press
to enter or modify the blocked number.
ENTER
Note: To clear a number from the list, see "Clearing a number from the
blocked numbers list," right column.
7
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber
of 972-555-3038, you should enter 5, 5, 5, -, 3, 0, 3, 8:
ID
Enter Fax Number
01:555-3038
To change a specific digit, press
until the cursor is under the digit, then use the numeric keypad to enter the
correct number.
8
Press
to save the setting. The display shows the next "slot" in the
ENTER
blocked numbers list.
If you do not want to enter or change a number for this slot, go on to step 9.
If you do want to enter or change a number for this slot, repeat steps 5–8.
9
Press
. The display now asks if you want to print the list.
STOP
Print BlockJunk Dial
Enter/Stop
10
If you do want to print the list, press
If you don't want to print it, press
standby mode.
2.64
and go on to step 5.
ENTER
and skip to step 10.
Select BlockJunk No.
or
01:555-2971
until you find an empty position in the list.
to move left or /
to move right
PROGRAM
and your machine will print it.
ENTER
and your machine will return to
STOP
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press /
,
, 1, 2,
PROGRAM
J
ENTER
If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
Block Junk Fax:Off
Program/Enter
2
Press
or /
until you see your preference, Mode2 or Mode3.
PROGRAM
Block Junk Fax:Mode2
Program/Enter
3
Press
,
. The display shows:
ENTER
ENTER
Select BlockJunk No.
01:555-2971
4
Press
or /
until you see the number you want to clear.
PROGRAM
5
Press
to clear the number.
CANCEL
To clear another number from the blocked numbers list, repeat steps 4–5.
Otherwise, go on to step 6.
6
Press
. The display now asks if you want to print the blocked numbers
STOP
list.
Print BlockJunk Dial
Enter/Stop
If you do want to print the list, press
Otherwise, press
to return your machine to standby mode.
STOP
.
and your machine will print it.
ENTER
Advertisement
Table of Contents
