Table of Contents
Advertisement
4
The
now asks if you want to set the calendar/clock to automatically
LCD
recognize daylight saving time (
Daylight Saving:Off
Program/Enter
When the setting is On, your machine automatically recognizes
the appropriate switchover Sundays each year.
When the setting is Off, no automatic change will occur.
5
Press
or /
until the mode you want appears.
PROGRAM
Here, we've changed the setting to On:
Daylight Saving:On
Program/Enter
6
Press
to save the setting and continue.
ENTER
7
The
now asks you to enter your fax number as you want it to appear on
LCD
other fax machines' displays or printouts. The fax industry term for this
number is Subscriber
.
ID
Your Fax Number
8
Use the numeric keypad to enter the fax number. To insert a dash, as shown
here, press
once. The number may contain up to 20
DIALING OPTIONS
characters (numbers and dashes).
Your Fax Number
972-555-5525
Note: If you make a mistake, press
To change just one number, press
move right. Press
CANCEL
number correctly.
9
Press
to save the number.
ENTER
).
DST
at 2
DST
to erase to the left.
CANCEL
to move left, or /
PROGRAM
to erase the number. Then re-enter the fax
10
The
now asks you to enter the name you want to appear at the top of
LCD
faxes you send. The name may be up to 22 characters in length.
Use the one-touch keys to enter letters and other non-numeric characters.
Your Name
_
on
AM
The word "Upper" means the machine will enter only upper-case letters. If
you press
, the machine will see it as an
R
To type a lower-case letter, press
Your Name
_
This means pressing one-touch keys will enter lower-case letters: pressing
will produce an r (not an
To switch back for upper-case entries, press
To enter spaces, punctuation and symbols, use the one-touch keys.
In "Beyond the Basics," we'll show you how to use the
even more characters (see page 2.2).
Note: If you make a mistake, press
To change just one character in the name, press
/
PROGRAM
re-enter the character correctly.
11
Press
to save the setting and continue.
ENTER
12
The
now asks you to enter the type of dialing needed for the fax machine,
LCD
either tone or pulse:
to
Phone Type:
Program/Enter
;Upper
(not an r).
R
. The display changes to:
ALPHABET
;Lower
) on the display.
R
.
ALPHABET
CODE
to erase to the left.
CANCEL
, to move right. Press
to erase the character. Then
CANCEL
Tone
Getting started
R
function to enter
to move left, or
1.11
Advertisement
Table of Contents
