Programming Regular Polling - Muratec F-160 Operating Instructions Manual

Beyond the basics
22
Press . The asks if you want to turn the Copy & Fax feature on or
ENTER LCD
off for this programmable one-touch number.
68: Copy&Fax: ---
Program/Enter
23
Press / until the mode you want appears.
PROGRAM
24
Press .
ENTER
25
The now displays the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
Your machine returns to standby mode.
If you do want to enter or change this key's programming, go back to step 4.
If you want to enter or change another key's programming, go back to step 2.

Programming regular polling

Note: You cannot program continuous polling into a programmable one-touch key.
For more information on continuous polling, see page 2.30.
To program a regular polling operation into a programmable one-touch key:
1
Press / , , 1,
PROGRAM C ENTER
touch number:
Select Program No.
65:No Number Stored
Note: If a programmable one-touch number other than 65 appears on the
, it means that you have already entered a number for 65.
LCD
Note: To erase a programmable one-touch key, see page 2.57.
2.48
. The shows an empty programmable one-
LCD
2
Press the key that you want to program or change. Here, we've selected 72.
Select Program No.
72:No Number Stored
Note: If your previous command for this key was for a polling transmission
and you want to keep this key programmed for a polling transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
.
STOP
3
If you want to select a different programmable one-touch key than the one
that appears on the
4
Press . The
ENTER
the programmable one-touch:
72:
Program/Enter
Note: If changing a previously stored command, skip to step 7.
5
Press /
PROGRAM
72:
Program/Enter
6
Press . The
ENTER
72:Fax#/Com-Options
_
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
72:Fax#/Com-Options
9-5550696_
Your display shows only 20 characters at a time. To view characters beyond
those 20, press
Important: Do not press
Note: To erase characters, press
To change just one character in the number, press
sor left, or /
Then re-enter the number correctly.
, press that key now.
LCD
asks for the type of operation you want to program into
LCD
Type: Comm.
until "Comm." appears.
Type: Comm.
now shows either:
LCD
72:Fax#/Com-Options
or
9-5558743_
to scroll to the left or / to scroll to the right.
PROGRAM
.
ENTER
to erase to the left.
CANCEL
to move it right. Press
PROGRAM
to move the cur-
to erase it.
CANCEL