SECTION 5
SETTINGS & PROGRAMMING
M. CAL (Sprayer setting) MENU
This button takes you to the Calibration input page. The rate, row width
and Tier selection are adjusted on this page. Also shown are the 3 x
Spray job Pre-sets, the Sim speed button.
N. HYD (Hydraulic setting) MENU
This button takes you to the Fan Speed Control settings and Hydraulic
boom settings page.
O. TOTAL (Jobs total) MENU
Up to 2 x jobs can be monitored on this page. Also displayed is the
Sprayer Totals History (in hectares and litres).
P. FILL (Tank Volume Re-set) MENU
Confirm tank volume after every tank using the slider bar.
22
HT-OMFUSION-A
Need help?
Do you have a question about the QUANTUM FUSION and is the answer not in the manual?