Table of Contents
Advertisement
Chapter 3 - Software Loading and Configuration
DLCI Setup
28 If you enabled Frame Relay in the WAN Ports Default Setup dialog box, the Frame Relay DLCI
Default Setup dialog box is displayed with all the groups inactive. Click OK to continue.
Note: When your MultiFRAD is connected to an active frame relay network service, it can detect
DLCIs and the frame relay management type. However, at this point your MultiFRAD is not yet
communicating with the frame relay network. We recommend that you finish loading the software and
then access the frame relay dialog box from the main menu.
29
Advertisement
Table of Contents
