Voice/Fax (Fr221/V2 Only) - Multitech MultiFRAD FR221 User Manual

MultiFRAD User Guide

Voice/Fax (FR221/V2 only)

The Voice/Fax tab controls the voice coder, Fax settings, DTMF gain, and some miscellaneous
options.
The MultiFRAD supports numerous state-of-the art ITU (International Telecommunications Union)
voice coders. The Voice Coder drop-down menu enables you to select from a range of coders with
specific bandwidths. The higher the bps rate, the more bandwidth is used. The channel you are
calling has to be using the same voice coder; otherwise, you will always get a busy signal.
The Fax group enables a fax machine to transmit and receive faxes through the MultiFRAD. If a fax
machine is connected to one of the voice/fax channels, the Max Baud Rate should be set to match
the baud rate of the fax machine (e.g., 9600 or 14400); refer to user documentation. The Fax Volume
setting controls the output level of the fax tones. These settings should be changed only under the
direction of Multi-Tech's Technical Support personnel (see
Support).
66
Chapter 6 - Warranty, Service and Tech