Table of Contents
Advertisement
MultiFRAD User Guide
Installing Your Software
The following procedure does not provide every screen or option used in the process of installing the
MultiFRAD software. The assumption is that a technical person with a thorough knowledge of
Windows and the software loading process is doing the installation. Additional information on the
MultiFRAD software is provided in the User Guide supplied with your MultiFRAD.
1
Run Windows on the PC that is connected to the Command Port.
2
Insert the MultiFRAD Disk 1 into the disk drive on the PC that is connected to the Command Port.
3
Win3.1 users - in Program Manager, click File | Run. In the Run dialog box, type a:\setup.exe or
b:\setup.exe (depending on the location of your floppy disk drive) in the Command Line field and
then click OK.
Win95/98/NT users - click Start | Run. In the Run dialog box, type (or click the down arrow and
choose) a:\setup or b:\setup (depending on the letter of your floppy disk drive) and then click OK.
4
The MultiFRAD 200 Series Setup Welcome screen is displayed.
Click Next> to continue.
5
Follow the on-screen instructions to install your MultiFRAD software.
You can choose the Destination Location of your MF200 software or you can accept the default
destination by clicking Next>. If you click Browse, you can select a different folder for your
MultiFRAD software; however, it is recommended that you accept the default folder, MF200.
6
The next dialog box enables you to name the Program Folder for the MF200 files. You can select the
default name, MultiFRAD 200, or name it anything you like; when done, click Next> to continue.
22
Advertisement
Table of Contents
