Table of Contents
Advertisement
Chapter 1 - Introduction and Description
Preview of this Guide
This User Guide describes the MultiFRAD and details how to install and configure it. The information
contained in each chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1 describes the MultiFRAD and includes front panel descriptions, back panel connectors,
and relevant technical specifications.
Chapter 2 - Installation
This chapter provides information on unpacking and cabling your MultiFRAD. Safety Warnings are
detailed, followed by the installation procedure in which each cable is connected to the MultiFRAD
and the unit is powered on.
Chapter 3 - Software Loading and Configuration
Chapter 3 details the software loading and configuration procedures. The MultiFRAD software is
windows based; numerous configuration options are available and are described in this chapter.
Chapter 4 - MultiFRAD Software
®
Chapter 4 describes the MultiFRAD software package designed for the Windows
environment.
Chapter 5 - Remote Configuration and Management
Chapter 5 provides procedures for changing the configuration of a remote MultiFRAD. Remote
configuration enables you to change the configuration of a unit by simply connecting a PC with
communications software to a remote MultiFRAD that has communications software and a modem
connected to the command port. You can then configure the unit. Chapter 5 also describes a typical
Telnet Client configuration application and Web browser configuration.
Chapter 6 - Warranty, Service and Tech Support
Chapter 6 provides instructions on getting service for your MultiFRAD at the factory, a statement of
the limited warranty, information about our user bulletin board service, and space for recording
information about your MultiFRAD prior to calling Multi-Tech's Technical Support personnel.
7
Advertisement
Table of Contents
