57 Repeat steps 55 and 56 for each additional phone number. You should enter one phone number for
each remote channel that you want to call. When you are finished, click OK.
58 You are returned to the main menu.
Click Download Setup.
59 The "Save Current Setup" dialog box is displayed.
Click the check box to retain the current setup as the User Default Configuration, then click OK.
60 The Writing Setup dialog box is displayed as the setup configuration is written to the MultiFRAD.
61 After the setup is written to the MultiFRAD, the unit reboots.
62 Check that the BOOT LED on the MultiFRAD is Off after the download is complete. This may take
several minutes as the MultiFRAD reboots.
63 You are returned to the main menu.
Your MultiFRAD is operational at this time.
Chapter 3 - Software Loading and Configuration
37