Changing Ipx Parameters - Multitech MultiFRAD FR221 User Manual

MultiFRAD User Guide

Changing IPX Parameters

The IPX Setup dialog box controls the four frame types and the WAN ports. The Advanced tab
enables IPX routing, enables auto learn of Ethernet network numbers, and specifies the distributed
name of the MultiFRAD.
The RIP and SAP default timers should not have to be changed for most applications. Disabling IPX
and SPX Watchdog Spoofing in the Bandwidth Optimization group has proven effective under certain
circumstances with Citrix clients.
The WAN tab on the IPX Setup dialog box lets you to enable or disable IPX routing on the WAN port,
change the network number for the WAN port, enable or disable NetBIOS, change the default RIP
and SAP timers, and optimize the bandwidth. If the WAN port is configured for frame relay, this
dialog box lets you to add logical WANs. How the WAN port is configured is controlled by the WAN
Port Setup dialog box that you access by clicking the WAN button on the main menu.
44