Smartgen HGM4020DC User Manual page 11

No. Type
Level 3 Open
29
Warn
High
30
Temp.1 Warn
Low Pressure 2
31
Warn
32 Low Level 2 Warn
High
33
Temp.2 Warn
Low Pressure 3
34
Warn
35 Low Level 3 Warn
Low Oil Level
36
Warn IN
HGM4020DC Genset Controller
HGM4020DC GENSET CONTROLLER USER MANUAL
If the config. sensor 2 is set as level sensor, when the controller detects
that the level sensor is open circuit and the action selects "Warn", it will
initiate a warning alarm and the corresponding alarm information will be
displayed on LCD.
When the controller detects that config. Sensor 1 temperature (sensor
type: temperature sensor) has exceeded the pre-set value, it will initiate a
warning alarm and the corresponding alarm information will be displayed
on LCD.
When the controller detects that config. sensor 1 oil pressure (sensor type:
oil pressure sensor) has fallen below the pre-set value, it will initiate a
warning alarm and the corresponding alarm information will be displayed
on LCD.
When the controller detects that config. Sensor 1 fuel level (sensor type:
level sensor) has fallen below the pre-set value, it will initiate a warning
alarm and the corresponding alarm information will be displayed on LCD.
When the controller detects that config. Sensor 2 temperature (sensor
type: temperature sensor) has exceeded the pre-set value, it will initiate a
warning alarm and the corresponding alarm information will be displayed
on LCD.
When the controller detects that config. sensor 2 oil pressure (sensor type:
oil pressure sensor) has fallen below the pre-set value, it will initiate a
warning alarm and the corresponding alarm information will be displayed
on LCD.
When the controller detects that config. Sensor 2 fuel level (sensor type:
level sensor) has fallen below the pre-set value, it will initiate a warning
alarm and the corresponding alarm information will be displayed on LCD.
When any one of inputs is configured as "Low Oil Level Warn", and is input
port is active, controller will initiate a warning alarm and the corresponding
alarm information will be displayed on LCD.
Version 1.0
Description
2019-04-10 Page 12 of 31