Table of Contents
Advertisement
Passport 1000 PG
Mortise Lock
6
Installation Instructions - Door Preparation
a
Verify Hand and Bevel of Door
Stand on outside/locked side of door when determining the door hand.
b
Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
If doors are not properly reinforced per ANSI 115.2, commercially available reinforcements should be installed.
Prepare door according to appropriate template:
• Field template A7949 (or wood doors).
• Manufacturer's template 4629 (for metal doors).
1-800-727-5477 • www.sargentlock.com
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
LH
Left Hand
Hinges Left
Reverse Bevel
Open Inward
Open Outward
Outside of door
Through-bolt
holes
Controller
cutout
Cylinder
hole
Lever
handle
holes
LHRB
Left Hand
Hinges Left
Figure 6A
Inside of door
Mortise
pocket
RH
Right Hand
Hinges Right
Reverse Bevel
Open Inward
Open Outward
Through-bolt
Backplate
mount holes
Controller cutout
Turn lever hole
Lever handle holes
7
RHRB
Right Hand
Hinges Right
holes
A7807D 12/22
Advertisement
Table of Contents
