Assa Abloy PASSPORT 1000 PG Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Assa Abloy Manuals
  4. Door locks
  5. Sargent Passport 1000 PG
  6. Installation instructions manual
Assa Abloy PASSPORT 1000 PG Installation Instructions Manual

Assa Abloy PASSPORT 1000 PG Installation Instructions Manual

Cylindrical lock
Hide thumbs Also See for PASSPORT 1000 PG:
Table of Contents

Advertisement

Quick Links

Download this manual
A7808B
10/12
Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
PG
PASSPORT 1000
Cylindrical Lock
Installation Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PASSPORT 1000 PG and is the answer not in the manual?

Questions and answers

Related Manuals for Assa Abloy PASSPORT 1000 PG

Summary of Contents for Assa Abloy PASSPORT 1000 PG

  • Page 1 PASSPORT 1000 Cylindrical Lock Installation Instructions A7808B 10/12 Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

  • Page 2: Table Of Contents

    Table of Contents Warning ...................2 General Description ..............3 Hardware Specifications ............3 Electronics Specifications ............3 Parts Breakdown ..............4 Installation Instructions ............6 Setting up the ....14 LockLink™ Contact Card PERSONA & Lockset Programming ............16 Operational Check ..............20 Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Page 3: General Description

    (powered by PERSONA) provides card/PIN access control, as well as detailed audit capabilities. • The PG stand-alone unit is available with both keypad and magstripe card technology, or magstripe only. • The Passport 1000 PG operates on six (6) “AA” alkaline batteries and may be used for both indoor and outdoor applications.

  • Page 4: Parts Breakdown

    Passport 1000 PG Cylindrical Lock Parts Breakdown PG Standalone With Card Insert and/or Keypad ITEM PART No. DESCRIPTION 52-0757 Lens (Cliplite) 52-0736 Outside Passport Escutcheon (With Keypad) 52-0737 Outside Passport Escutcheon (Without Keypad) 52-3593 Slim Style Keypad Assembly (KP-PG Only)
  • Page 5 Passport 1000 PG Cylindrical Lock Parts Breakdown (Continued) Bored Cylindrical Lock ITEM PART No. DESCRIPTION Outside Lever (Reference Catalog for Available Styles) 10-0043 Lever Retainer Key (In Screw Pack 10-2052) Cylinder Assembly (Reference Catalog for Available Cylinders) Rose (Reference Catalog for Available Styles)

  • Page 6: Installation Instructions

    Passport 1000 PG Cylindrical Lock Installation Instructions 1 - Verify Hand and Bevel of Door Stand on outside/locked side of door when determining the door hand. LHRB RHRB Left Hand Left Hand Right Hand Right Hand Hinges Left Reverse Bevel...
  • Page 7 Passport 1000 PG Cylindrical Lock 3 – Prepare Frame for Strike Centerline of Latch Front and Strike Install strike (Fig. 3A) (2) #8-32 x 3/4” Screws Fig. 3A 4 - Latch Bolt and Fire Stop Plate Installation A. Latch Bolt Installation: Outside of Door 1.
  • Page 8 Passport 1000 PG Cylindrical Lock 5 – Lock Installation A. Lock Preset: • Lock body holes – 12 & 6 o’clock (Fig. 5A). • Door thickness – 1-3/4” thick. Refer to adjustments below for other door conditions (Fig. 5B). B. Through bolt and Door Thickness Adjustment: •...
  • Page 9 Passport 1000 PG Cylindrical Lock 6 – Remove Outside Lever Only 1. Insert key, rotate 45° clockwise and hold (Fig. 6A). 2. Depress lever retainer with push pin tool (provided). 7 – Securing the Lock to Door Fig. 6A 1. Feed wire and connector:...
  • Page 10 Passport 1000 PG Cylindrical Lock 9 – Assemble Trim 1. Verify cylinder spacer is inserted into horizontal slot of lock body. 2. Place rose scalp over shaft of lock body against surface of door (Fig. 9A); hand-tighten (clockwise). 3. Attach lever (push until engaged).
  • Page 11 Passport 1000 PG Cylindrical Lock 11 – Gasket Installation (Optional) Note: Optional, for non-fire rated doors only. For non-fire rated door applications, an optional gasket may be Passport Gasket used as a weather seal between the escutcheon and the outside door surface.
  • Page 12 Passport 1000 PG Cylindrical Lock 13 – Installation of Inside Component Assembly Inside of Door Insert bottom of Component Assembly first (Fig. 13A), then clip top of Component Assembly to backplate, verifying both tabs attached securely. Modular component assembly Fig. 13A 14 –...
  • Page 13 Passport 1000 PG Cylindrical Lock 15 - Battery/Battery Pack Installation 1. Place (6) “AA” batteries into the compartment being careful to align polarity (- & +) properly. 2. Insert battery pack and click into place, making sure polarity terminals on the battery pack are oriented upwards (Fig. 15A).

  • Page 14: Setting Up The Persona Locklink™ & Contact Card

    Passport 1000 PG Cylindrical Lock Setting up the LockLink™ and Contact Card for First Use* *NOTE: The following steps in this section are only performed one time. Once Bluetooth pairing is complete, these steps do not need to be repeated to program locks (Section 8 ”Lockset Programming”).
  • Page 15 Passport 1000 PG Cylindrical Lock 4. The Pocket PC will enable Bluetooth and begin discovery. If you receive a warning, "No Devices Found," then check again to see the blue light flashing on the Contact Card and tap ‘Retry’ .

  • Page 16: Lockset Programming

    Passport 1000 PG Cylindrical Lock Lockset Programming 1. Tap then tap to launch the LockLink™ program. Choose Menu and then ‘Setup’. 2. Pick the COM port noted in Step 6. Check the box ‘Use Bluetooth’ and click ‘Apply’. Start the PERSONA LockLink™ software: 3.
  • Page 17 Passport 1000 PG Cylindrical Lock Lockset Programming Instructions (Continued) Upload Full Program After locks are installed, they must have program files copied into them before they can receive and interpret data. In many ways, the program files act as the locks’ operating system by interpreting the lock data to control each lock’s behavior.
  • Page 18 Passport 1000 PG Cylindrical Lock Lockset Programming Instructions (Continued) 5. Reinsert Contact Card a second time to initialize the program. NOTE: You should hear the motor run briefly. 6. Program initializes and directs you to remove the Contact Card. 7. Follow the on-screen directions and reinsert the Contact Card a third time.
  • Page 19 Passport 1000 PG Cylindrical Lock Lockset Programming Instructions (Continued) 8. Remove the Contact Card. 9. To exit and return to the program screen, tap the button. 10. After programming the new lockset, verify operation by performing the Operational Check (refer to Section 9).

  • Page 20: Operational Check

    Passport 1000 PG Cylindrical Lock Operational Check IMPORTANT: Be sure to test functions prior to closing door. In all cases, perform the following checks: 1. Ensure that inside lever retracts latch (and deadbolt for deadbolt functions). • For devices with cylinders, the following checks apply: Insert key into cylinder and rotate: a.
  • Page 21 Passport 1000 PG Cylindrical Lock Notes A7808B...
  • Page 22 The company’s customer base includes commercial construction, institutional, and industrial markets. Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Table of Contents