Table of Contents
Advertisement
Passport 1000 PG
Mortise Lock
19
Setting up the LockLink™ and Contact Card for First Use, continued
b
Confi guring the LockLink™ Software
1. When the
appears, highlight it and tap 'Next'.
2. Enter "1234" when prompted for
'Passcode.'
3. Tap the 'COM Ports' tab at the bottom of
the screen. Note the COM port number
assigned to the Firefl y device.
NOTE: If you do not see the FireFly-EAE0 device
in the COM port list, tap 'New Outgoing Port'
and pick the FireFly-EAE0 device before tapping
'Next'.
4. Choose an available COM port number
(COM8 is often a good choice) and tap
'Finish."
20
LockSet Programming
1. Tap
to launch the LockLink program.
2. Choose Menu and then 'Setup'.
3. Select the COM port noted in Step 3 of
Section 20b.
4. Check the 'Use Bluetooth' box and tap
'Apply'.
1-800-727-5477 • www.sargentlock.com
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
list entry
then tap
17
A7807D 12/22
Advertisement
Table of Contents
