Table of Contents
Advertisement
Passport 1000 PG
Mortise Lock
13
Installation Instructions - Installation of Outside Escutcheon and Mounting
Plate Assembly, continued
Cable from lock body feeds thru bottom (Figure 13A and 13B).
3. Attach grounding lug to bottom right screw and note upright positioning of lug as shown (Figure 13B).
4. Insert other three corner screws and tighten, fastening the outside escutcheon to the door (Figure 13B).
IMPORTANT: If the following step is skipped, the product will not be UL-compliant:
5. Attach two (2) #8 x 3/8" fl at head wood screws for wood doors, or (2) #8-32 x 3/8" fl at head machine screws
for metal doors (Figure 13C).
Outside
Passport
Trim
14
Installation Instructions - Installation of Inside Component Assembly
Insert bottom of component assembly fi rst (Figure 14), then clip top of component assembly to backplate,
verifying both tabs attached securely.
1-800-727-5477 • www.sargentlock.com
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Inside of door
Figure 13B
Mounting
plate
(4) #8 - 32 x 1 - 7/8" flat
head machine screws
Attach ground
lug to bottom
right screw
Inside of door
Figure 14
13
Inside of door
(2) #8 - 3/8"
flat head
wood
screws or
(2) #8 - 3/8" flat
head machine
screws
Figure 13C
A7807D 12/22
Advertisement
Table of Contents
