Table of Contents
Advertisement
Passport 1000 PG
Mortise Lock
19
Setting up the LockLink™ and Contact Card for First Use*
*NOTE: The following steps in this section are only performed one time. Once Bluetooth pairing is complete,
these steps do not need to be repeated to program locks (Section 8 "Lockset Programming")
a
Pairing the Pocket PC with the Contact Card
1. To begin, highlight (by tapping) the
menu.
2. Next, tap the 'Connections' tab at the
bottom of the screen and highlight the
Bluetooth icon from the 'Settings'
menu.
3. Insert the Contact Card into a lock
(provides power to Contact Card) and
then select "Add New Device..."
4. The Pocket PC will enable Bluetooth and begin discovery. If you receive a warning, "No Devices Found," then
check again to see the blue light fl ashing on the Contact Card and tap 'Retry'.
•
If the blue light is not fl ashing, remove the Contact Card, wait for the lights to go dark, then reinsert it
before tapping 'Retry'.
•
If this step fails repeatedly, then contact PERSONA technical support at (800)–481–8464.
1-800-727-5477 • www.sargentlock.com
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
button and select the 'Settings'
Contact Card
16
A7807D 12/22
Advertisement
Table of Contents
