Half Dummy M, N And P Escutcheon Installation; Installing Knobs Sold Before October 2017 Only; For Installation Assistance Contact Corbin Russwin - Assa Abloy Corbin Russwin ML2000 Series Installation Instructions Manual

5

Half Dummy M, N and P Escutcheon Installation

1. Assemble and install outside dummy
adapter plate. (Figure 32)
2. Install mounting screws and washers for
the adapter plate. (Figure 33)
3. Mount escutcheon. (Figure 34)
4. Install mounting screws and washers for
the escutcheon. (Figure 35)
5. Install inside lever or knob by inserting
dowel screw. (Figure 36)
6

Installing Knobs Sold Before October 2017 ONLY:

Before inserting knob lockbody into door, push
spacer out of lock using a screwdriver.
(Figure 37)
NOTE:
Install spindles in square orientation.
(Figure 38)
BAD
STANDARD
Figure 38
Lever
Corbin Russwin
225 Episcopal Road
Berlin, CT 06037
Phone: 800-543-3658
Fax: 800-447-6714
corbinrusswin.com
Corbin Russwin is a brand associated with ASSA ABLOY Access and Egress Hardware Group,
Inc., an ASSA ABLOY Group company. Copyright © 2018, ASSA ABLOY Access and Egress
Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express
written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
GOOD
MUSÉO
Figure 32
Figure 33
Figure 34
Figure 35
Figure 36
Figure 37

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Spacer
FM483 11/18