ASSA ABLOY Yale YDM7116A - 5-in-1 Access Smart Lock Manual

ASSA ABLOY Yale YDM7116A - 5-in-1 Access Smart Lock Manual

Advertisement

ASSA ABLOY Yale YDM7116A - 5-in-1 Access Smart Lock Manual

Front Body

(Front Body, installation on the outside of the door)
Front Body

  1. Keypad(10-key)
  2. Dead Bolt Jam Lamp
  3. Lever
  4. Fingerprint Sensor
  5. Card Key Reader
  6. Battery Change Lamp
  7. Reset Button
  8. Emergency Key
  9. Emergency Power Supply Terminal
  10. Emergency Cover

Basic Contents

  • User Manual
  • Installation Guide
  • AA Batteries X 4
  • Card Keys X 4
  • Mechanical Keys X 2
  • Screws

Optional Accessories

  • Remote Controller
  • Remote Control Module
  • Bluetooth Module

Specifications

Parts Specifications Remarks
Front Body 68(W) X 340(H) X 40.18(D) mm

Operating temperature

-15~55˚C (5~131 ˚F)

Main Body 72(W) X 344(H) X 36(D) mm
Battery 4EA 1.5V AA Alkaline batteries(Operating voltage: 4.5~6V)
Optional product Remote controller: wireless

※ Battery life may vary depending on temperature, moisture levels, frequency of use and the quality of the batteries.

Main Body

(Main Body, installation on the inside of the door)
Main Body

  1. Battery Cover
  2. Slot for Remote control module (Optional)
  3. Registration button
  4. Lever
  5. Safe Handle Button
  6. Manual Thumb Turn
  7. Internal Forced Lock Switch
  8. 1.5V AA Alkaline Batteries (4PCS)
  9. Auto/Manual Lock Button
  10. Volume Control Switch
  11. Lock Case
  12. Latch Bolt
  13. Automatic Locking Sensor
  14. Dead Bolt

Setting Menu

Normal Mode: Without a designated person, anyone who knows 'User PIN Code' has authority to set features.
Master Code: Only a designated person who knows 'Master PIN Code' has authority to set features.
Visitor Code: The visitor code is different from user code and given out to visitors only.
Onetime Code: The onetime code is used only once for unlocking the door lock and automatically deleted after usage.
User Slot Number: It should be 2 digits(like '01', '02'...'99', '00') and available in advanced mode.

Touch the Keypad of the Front Body with your palm to begin
Press button on the Keypad
Press button on the Keypad
Press (Registration) button in every steps to start or complete the session
Enter User Card Key (Up to 100EA)
Enter User Fingerprint (Up to 100EA)
Enter User Code (4 ~ 10 digits)
Enter Master Code (4 ~ 10 digits)
Enter Visitor Code (Only 4 digits)
Enter Onetime Code (Only 4 digits)
User Slot Number should be 2 digits
(like '01'... '99' and '00': Location of 100th user slot must be assigned "00" instead of "100". )
Rotation area to add more features

Product Features

One-touch Fingerprint Verification
Easy Scan by Goodix fingerprint solution: Live finger detection and secure matching The leading liveness performance improves the security of Yale smart lock dramatically.

Yale Access Bluetooth App (Yale Access BLE module: optional item)
This service is an innovative solution provided by YALE. Using high-tech IoT technology, user can access and unlock the digital door lock with your smartphone.

Smart Touchpad Automatic Locking
The automatic lock sensor detects the door closing and locks the door automatically within 5 seconds. The door locks when touch the keypad with the palm.
As the automatic lock function does not work in manual lock mode, make sure to check that the door is securely locked when leaving the premises.

3 minute Lock Out Feature
After five (5) unsuccessful attempts of an invalid code or fingerprint, card key lock out mode is activated for 3 minutes.

Smart Etiquette
When entering a pin code on the keypad, the user can open the door lock in silent mode.

Fake PIN Code
Security enhancement to enter any number before or after entering a password to prevent the PIN code from being exposed.

Internal Forced Lock
It is a security-enhancing function that 'disables' authentication methods such as passwords, RFID cards and fingerprints from outside when setting up functions indoors.

External Forced Lock
It is a security-enhancing function that an alarm goes off if someone opens door from inside when setting up functions outside.

Voice Guide Feature
It guides user the operation status how to set each features, mode for easier and more convenient use.

Other features and Benefits

  • Remote Controller (Optional):
    This option may not be available depending on your country or local dealer.
  • Network Module/Controller (Optional):
    It allows door lock to connect with Home network controller.
  • Intrusion/Broken Alarm.
  • Low Battery Alarm and Emergency Power Supply.

Normal Mode (Default Mode)

Normal mode is a convenient mode for anyone to set the digital door lock. User can set password like user code, visitor code, onetime code and register user's fingerprints, card keys as well.
Factory default is a normal mode.

User Code

Only 1EA

Normal Mode (Default Mode) - User Code - Only 1EA

Card Key

Up to 100EA

Normal Mode (Default Mode) - Card Key - Up to 100EA

Fingerprint

Up to 100EA

Normal Mode (Default Mode) - Fingerprint - Up to 100EA

Visitor Code

Only 1EA

Normal Mode (Default Mode) - Visitor Code - Only 1EA

Onetime Code

Only 1EA, Automatically deleted after use

Normal Mode (Default Mode) - Onetime Code - Only 1EA, Automatically deleted after use

Delete all credentials (Fingerprint, Card)

Normal Mode (Default Mode) - Delete all credentials (Fingerprint, Card)

Language Change

Normal Mode (Default Mode) - Language Change

Bluetooth setting (Yale Access app)

Set up a new device in the app

Normal Mode (Default Mode) - Bluetooth setting (Yale Access app) - Set up a new device in the app

Remote Contoller

Up to 5EA

Normal Mode (Default Mode) - Remote Contoller - Up to 5EA

Home Network Controller

Normal Mode (Default Mode) - Home Network Controller


How to press set button of remote controller
Press the set(registration) button located on the front of remote controller. You can press it using a pin like the picture.

Please note the following when using Yale Access Bluetooth App.

  • Depending on product type or FW version, app registration and door lock connection in normal mode may not be possible, so if registration is not possible, change from normal mode to master mode and try again.
    [ App Registration in Master Mode: Master Pin Code-> I (Registration Button)-> 7 -> # ]
  • Because Yale Access Bluetooth App is only available in master mode, user code automatically changes to master code when registering APP in normal mode.
  • Please be informed that all registered credentials will be deleted when changing mode or registering and deleting app.

Unlocking Door with Code

  1. Palm touch

  2. Enter the Code

  3. Palm touch

    OR
    Enter the button

Unlocking Door with Fingerprint / Card Key

  1. Touch the panel of fingerprint area sensor using registered fingerprint for 1 second.

  2. Fingerprint scan completed


Contact registered Card Key

Safe Handle Feature

To disable Safe Handle Setting
To disable Safe Handle Setting

  • Open the battery cover and take out a hex wrench.
  • Keep pushing the safe handle button.
  • Turn the fixing screw clockwise to fix

To enable Safe Handle Setting
To enable Safe Handle Setting

  • Open the battery cover and take out a hex wrench.
  • Turn the fixing screw anticlockwise until the safe handle button comes out.

Opening Door(Inside/Outside)

From Outside

Press the lever handle down to open door

From Inside

To open when Safe Handle Settings are enabled:
Keep pushing the safe handle button. And then, Press the handle down to open the door.
To open when Safe Handle Settings are disabled:
Press the lever handle down and open the door.

Internal Forced Lock

Close the door and then move the lock button to "LOCK" position.

Unlocking Door with Smart Etiquette

  1. Palm touch

  2. Enter the User PIN Code then touch the keypad with your palm

    OR
    Scan finger print

    OR
    Touch Card Key

Locking the Door(Inside/Outside)

Automatic Lock Mode(Inside/Outside)
In automatic lock mode, the lock automatically locked within 5 seconds after closing the door and detecting the automatic lock sensor.
Manual Lock Mode
The door locks when touching the keypad with the palm. (outside)
Use Thumb turn knob on the main body. (Inside)

Automatic/Manual Lock Setting

Automatic Lock Setting
Release the button to set automatic lock mode on the main-body (after opening the battery cover)
Manual Lock Setting
Press the button to set manual lock mode on the main-body.

Unlocking Door with Fake Code

  1. Palm touch

  2. Enter the user code and fake code

    OR
    Enter the Fake Code and User code

  3. Palm touch

External Forced Lock

External Forced Lock Setting-Fingerprint
Scan with registered Fingerprint and hold the fingerprint area until you hear 3 beep sounds.

External Forced Lock Setting – User Code

  1. Palm touch

  2. Enter the User PIN Code

  3. Enter the button for 5 Sec.

External Forced Lock Setting – Card Key

Contact Card Key on [Card Key reader] for 5 sec. until you hear 3 beeps.

Releasing External Forced Lock Setting
When the door is unlocked from outside based upon proper authentication, the External forced lock will be released.

Volume Setting

The operation sound volume will be adjusted according to the Volume Switch setting.

3-minute Lock Out Feature

If an invalid user code, fingerprint or card key is entered five(5) times in a row, lock out mode is activated and all buttons on the front body are not activated for three minutes.

To Release 3-minute Lock Out

  • Open with inside door bar.
  • Open the door with mechanical key.
  • Press button.

Alarm

Intrusion Alarm: The alarm goes off when someone forces the door open. For example, In case of an intrusion by opening a gap in the door while the door is locked.
Broken Alarm: The alarm sounds when the front part is completely separated from the main set. For example, forced removal of external product (front body).

To turn off alarm

  • Enter the registered User code.
  • Press button for 5 seconds.
  • Enter the registered Fingerprint.
  • Touch the registered Card key.

Emergency power supply for discharged batteries

  1. Replace 9V Batteries

  2. Palm touch

    OR
    Touch Card Key

    OR
    Scan Fingerprint

Power supply


The product uses four 1.5V Alkaline AA batteries. They may sustain 1 year if used 10 times a day. (Users are advised to use authentic Alkaline batteries.)

You must replace all 4 batteries in the following cases:
* The Low Battery LED on keypad flickers red.
* When low battery notification message is played.

warningRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE OR RECYCLING PROGRAM.

Code Chart

Duplicate if necessary

PIN Code Management(Up to 100 Users.)

Master Mode

Master mode is a mode in which only the administrator can set the door lock and provide access to other users. 100ea user passwords, 100ea card keys, 100ea fingerprint and individual registration and deletion of one-time passwords enable efficient management of visitors.

Switch to master mode (from normal mode)

Master Mode - Switch to master mode (from normal mode)

Master Pin Code

Change Only 1EA

Master Mode - Master Pin Code - Change Only 1EA

User Code

Up to 100EA

Master Mode - User Code - Up to 100EA

Fingerprint

Up to 100EA

Master Mode - Fingerprint - Up to 100EA

Card Key

Up to 100EA

Master Mode - Card Key - Up to 100EA

Onetime Code

Only 1EA, Automatically deleted after use

Master Mode - Onetime Code - Only 1EA, Automatically deleted after use

User Slot Number should be 2 digits.
like '01'... '99' and '00': Location of 100th user slot must be assigned "00" instead of "100".

Delete all credentials

Master Mode - Delete all credentials

Language Change

Master Mode - Language Change: Korean / Chinese / English / Taiwanese

Bluetooth setting (Yale Access app)

Set up a new device in the app

Master Mode - Bluetooth setting (Yale Access app) - Set up a new device in the app

Remote Contoller

Up to 5EA

Master Mode - Remote Contoller - Up to 5EA

Home Network Controller

Master Mode - Home Network Controller

Switch to normal mode (from master mode)

Master Mode - Switch to normal mode (from master mode)

※ Voice guidance function: The lock provides voice guidance for user and it will be helpful to set up lock's features correctly.
※ All registered passwords and other credentials can be deleted at the time of mode change.
※ Please install(register) the network module when you want to use a remote control or home network.

Important notes


Do not install the digital door lock in an outdoor environment.


Do not spray water directly or wipe with chemicals such as benzene, gasoline or alcohol.


When using, remember that someone else can see the password.


Do not attempt to disassemble the digital door lock by yourself.


Do not use force with a tool onto the product.


Make sure to lock the door tight when you go out.

Safety and Warning

  • Do not install the digital door lock in an outdoor environment.
  • Do not attempt to disassemble the digital door lock by your self.
    By doing so, you may get an electronic shock and damage the product. Do not use force with a tool onto the product.
  • Make sure to lock the door tight when you go out.
  • Be careful not to hit the handle as it may cause injuries.
  • Do not use water and any type of solvent to clean the product such as gasoline or benzene as they can cause damage to electronic circuit, deterioration and or paint peel-off.
  • It is recommended to change User Code on a regular basis.
  • In manual lock mode, make sure to double check whether the door is securely locked.
  • When External Forced lock is set and unlock the door, the alarm will be activated.
  • Do not use rechargeable batteries.
    Only alkaline batteries are recommended.
  • Make sure to follow the above instructions to avoid any injuries.
  • It cannot be guaranteed in a special conditions & environment such as water condensation, seaside.

PLEASE READ INSTRUCTIONS BEFORE USE.
The functions and design of this product can be changed without prior notice for performance and quality improvement.


Packaging of this product can be recycled.

WEEE Note: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check your local authority or retailer for recycling advice.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ASSA ABLOY Yale YDM7116A - 5-in-1 Access Smart Lock Manual

Advertisement

Need Assistance?

Do you have a question about the Yale YDM7116A that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents