4.5.2 Fitting The Angle Adapter; 4.5.3 Replacing The Wearing Parts - WAGNER PEA-C4-HiCoat FM Operating Manual

4.5.2 Fitting the angle adapter

E
2
D
0390931_montage04

4.5.3 Replacing the wearing parts

Sample assembly: Angle adapter WA90 C4
3
1
0390931_montage03
24
1
C
4
6
5
7
2
0390882
Maintenance and cleaning
C
Fit the electrode holder with nozzle into the
nozzle insert and fasten in place using the
outer nut.
D
Slide the angle adapter onto the spray gun
body and tighten easily using the threaded
sleeve.
E
Swivel the angle adapter 2 into the desired
position and afterwards fasten in place
using the threaded sleeve 1 .
1. Disconnect from the spray gun body
•
Undo the threaded sleeve 1 and disconnect
the angle adapter 2 from the spray gun body
3 .
•
Loosen the outer nut 4 .
•
Pull the electrode holder 5 with nozzle 6 out of
the nozzle insert 7 .
Caution
When pulling out and inserting the electrode
holder, ensure that the insert is not damaged!
-
PEA-C4-HiCoat FM
0405_Anbau_winkeladapter.doc
0405_Verschleiss_winkeladapter.doc
01 / 2008