Replacing The Protective Wedge - WAGNER PEM-X1 Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.7

REPLACING THE PROTECTIVE WEDGE

Note:
A wedge tool is available to prevent the protective wedge from being damaged when
dismantling and inserting.
The wedge tool has a removal side (E) and an attachment side (A). Use the right side for the
corresponding procedure!
You will fi nd the necessary wearing parts and spare parts in Chapter 13 "Spare Parts" of this
operating manual.
2
3
1.
2.
3.
ORDER NUMBER DOC 2326020
1
E
P_01675
A
1 Wedge tool
2 Electrode holder (shown with a cut-away
view to improve comprehension)
3 Protective wedge (when positioned)
Procedure:
1. Guide wedge tool 1 into electrode holder 2
up to stop.
2. Pull protective wedge 3 out of electrode
holder 2 using wedge tool 1.
3. Press protective wedge 3 sideways out of
wedge tool 1 manually (without tool).
PEM-X1
43