Replacing The Protective Wedge - WAGNER PEA-C4-HiCoat FM Operating Manual

Maintenance and cleaning
4.3

Replacing the protective wedge

Hint
To ensure that the protective wedge is not damaged when dismantling and inserting
them, a wedge tool is available for assembly.
Proceed as described below:
01 / 2008
1
Wedge tool
2
Protective wedge (install position)
3
Electrode holder (cut open view)
•
Guide the wedge tool
holder 3 to the stop.
•
Pull the protective wedge 2 out of the
electrode holder 3 using the wedge tool.
•
Press the protective wedge lateral out of the
wedge tool manually without a tool .
0390882
-
PEA-C4-HiCoat FM
0403_ .doc
1
into the electrode
19