Replacing The Spray Gun - WAGNER PEM-X1 Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.2.4

REPLACING THE SPRAY GUN

Before replacing the spray gun, any powder residue must be thoroughly removed.
The wearing parts in the spray gun, marked in the spare parts list with " ", must be regularly
checked and, if necessary replaced.
Procedure:
1. Switch off control unit.
2. Disconnect electrical cable 1 from control unit 2.
3. Disconnect powder feed hose 3 and atomizing air hose 4 from spray gun 5.
4. Connect powder feed hose 3 and atomizing air hose 4 to the new spray gun 5.
5. Connect electrical cable 1 to control unit 2.
6. Switch on the control unit.
7. The spray gun is ready for use again.
ORDER NUMBER DOC 2326020
1
2
P_01672
5
4
3
PEM-X1
38