Maintenance and cleaning
4.
Maintenance and cleaning
4.1
Replacing the spray gun
Before you commence the replacement of the spray gun any powder residue must be
removed thoroughly .
Caution
Repair or replacement of the spray gun or parts of the spray gun are only allowed to be
performed outside the hazard area and in a suitable place by specialist personnel!
The wearing parts in the spray gun, marked in the spare parts list with *, must be regularly
checked and, if necessary replaced.
D
•
Exchange the spray gun for a new one and assemble it in reverse order.
03/2008
H
J
Pemt3_0004
0351709
F
•
Switch off the control unit and/or high
voltage generator.
G
•
Disconnect the electrical cable H from
the control unit J .
•
Disconnect the powder feed hose G
and Tribo air hose F from the spray
gun D .
- PEM-T3
0401_ .doc
0401_Pemt3_Ausbauen.doc
11