Table of Contents
Advertisement
Always sent to SIP messages will always be sent to the Outbound proxy.
Not in route: remove the Route header from SIP requests.
This option allows 3rd party Service Providers or Cloud Solutions to monitor the operation status of the GDS371x by using related
Enable
SIP Calls.
RTCP
By default, it's disabled. Users can choose either RTCP or RTCP-XR.
H.264
The H.264 payload type can now be configured to be compatible with 3rd party video phones, as well as other advanced SIP settings,
Payload
to easy the system integration process. The default is 99.
Type
Accept
Incomin
g SIP
When set to "Yes", the SIP address of the Request URL in the incoming SIP message will be checked. If it doesn't match the SIP
from
server address of the account, the call will be rejected. The default setting is disabled.
Proxy
Only
This option is used with 3CX so that the GDS37xx can be compatible with 3CX auto-provisioning. The option adds the MAC address
Add
into User-Agent in the SIP Header.
MAC in
No: to disable the option
User-
Yes to all SIP: SIP messages will always behave User-Agent
Agent
Yes except REGISTER: SIP messages will always behave User-Agent except for the REGISTER message
SIP URI
Scheme
When
This option allows the GDS371x to work with the Cisco WebEX server as a SIP client. The two modes are SIP and SIPS.
Using
TLS
Support
SIP
When enabled, the GDS371x will work with the Cisco WebEx server as a SIP client.
Instance
ID
Vocoder Settings
Preferre
Selects the first audio codec by priority order (lowest is the highest priority). Supported codecs are PCMU, PCMA, G.722, and
d
Vocoder
G.729A/B.
1
Preferre
Selects the second audio codec by priority order (lowest is the highest priority). Supported codecs are PCMU, PCMA, G.722, and
d
Vocoder
G.729A/B.
2
Preferre
Selects the third audio codec by priority order (lowest is the highest priority). Supported codecs are PCMU, PCMA, G.722, and
d
Vocoder
G.729A/B.
3
Preferre
Selects the fourth audio codec by priority order (lowest is the highest priority). Supported codecs are PCMU, PCMA, G.722, and
d
Vocoder
G.729A/B.
4
Codec
Negotiat
Selects the negotiation Priority, wether it is for the Caller or the Callee,
ion
Set to Callee by Default.
Priority
Configures the number of voice frames transmitted per packet. When configuring this, it should be noted that the "ptime" value for
the SDP will change with different configurations here. This value is related to the codec used and the actual frames transmitted
Voice
during the in-payload call. For end users, it is recommended to use the default setting, as incorrect settings may influence the audio
Frame
quality.
Per TX
The default setting is 2.
Range is from 1-64.
Phone Settings
Advertisement
Table of Contents
