Door System Settings; Basic Settings - Grandstream Networks GDS371 Series User Manual

Note
Similar command can be applied to open source application like VLC MediaPlayer to retrieve H.264 video stream with better quality:
rtsp://admin:password@IP_GDS3710:Port/X
Where X=0,4,8 corresponded to 1 , 2

Door System Settings

Users can configure system operations parameters, like input PIN for the door and manage users' settings.

Basic Settings

This feature allows customers to integrate GDS37XX with 3rd party web relay to control door open over network, via script
or other applications, to meet real application scene and enhance security. User need to input web relay IP address or
domain name, as well as authentication information, to make this to work.
There are four choices in the pull-down selection:
● Local Relay: Local Relay is the GDS371x controlling the relay. The strike is wired into the COM2 or COM1 port of the
GDS371x depending 1 door or 2 door need to be controlled.
● Webrelay: When Webrelay is selected, customers need to continue configure the webrelay IP address or domain name,
together with credentials like Username and Password. When legal open door event happened, the configured web
Door Relay Options
relay will get the communication from GDS371x, and will operate the strike to open door for the authenticated open
door request.
● GSC3570 Relay: When the Door relay is set to GSC3570, it gives the option to connect it to the GSC3570 device by
entering the Phone number and door password.
● Send Wiegand Code on Remote Open Door Action: When this mode is selected, The device will send PIN1/PIN2 code
via the Wiegand interface when the remote HTTP API open door1/door2 has been executed.
Note: In web relay mode, the strike is wired to the web relay controller device.
When Door relay Option set to Webrelay, then enter the correct URL used by the third party controller so that the GDS3710
send the command to activate the relay.
This adds an extra layer of security so when legal open door event happened, the configured web relay will get the
communication from GDS3710, and will operate the strike to open door for the authenticated open door request or use
that command to operate other industry application.
Webrelay URL ON
Notes:
● Now there are two Webrelay URL fields available, with On or Off URL command allowed or other usage URL command
allowed. Also allow Username and Password configured if the 3rdparty Webrelay requiring this security feature.
● If some 3rdparty Webrelay only support one URL command, then just leave another Off URL blank, or put whatever
there as long as it is NOT a URL command.
When Door relay Option set to Webrelay, then enter the correct URL used by the third party controller so that the GDS3710
Webrelay URL OFF
send the command to disable the relay.
st nd rd nd
and 3 video stream (2 recommended).
Door System Settings Page