Access Settings - Grandstream Networks GDS371 Series User Manual

SNMPv3 Trap Privacy Key
TR-069
This page configures the GDS371x TR-069 parameters.
Enable TR-069
ACS URL
ACS Username
ACS Password
Periodic Inform Enable
Periodic Inform Interval (s)
Connection Request Username
Connection Request Password
Connection Request Port
CPE Cert File
CPE Cert Key

Access Settings

This page configures the GDS371x access control parameters.
Enter the SNMPv3 Trap Privacy Key.
TR-069 settings page
Sets the device to enable the "CPE WAN Management Protocol" (TR-
069). The default setting is "No".
Note: Reboot the device to make changes take effect.
Specifies URL of TR-069 ACS (e.g, http://acs.test.com), or IP address.
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. The default is "No".
Configures to send periodic "Inform" packets to ACS based on a
specified interval. The default setting is 86400.
Enters username for the ACS to connect to the device.
Enters the password for the ACS to connect to the device.
Enters the port for the ACS to connect to the device.
Enters Cert File for the device to connect to the ACS via SSL.
Note: The CPE version has been updated to 1.0.5.5
Uploads Cert Key for the device to connect to the ACS via SSL.
Table 14: Access Settings